How To Set Up The MetMo Dual Piston Stand

Setting up the MetMo Dual Piston Stand for the first time.

1. Remove the Piston stand from the box and take out the included O rings.
2. Take your first piston and unscrew the pressure release valve.
3. Carefully place the pressure release valve and the Piston pin to one side. Don't let the pin roll away! 
4. Take the first O ring out of the bag and place it around the base of the Piston threads. Ensure it's seated and untwisted.
5. Screw the Piston into the dual Piston stand.
6. Repeat for your second Piston.
7. Carefully replace the Piston pins. Be careful not to knock the pins as this can cause damage to your Piston.
8. Enjoy your pneumatic fun!